Metriform / Quick Form is the leading formwork system for the construction of concrete floors and walls. Minimal assembly and dismantling time coupled with a limited number of components highlight quick form as today’s most cost-effective system.

Metriform incorporate the advantages of early striking (enabling early removal of formwork beams and panels while R.C.C. slab remains supported on props with drop-heads) which will dramatically increase output, whilst employing labour more efficiently. Metriform system can be used with props for concreting of slabs at ordinary heights, or with quiklok scaffolding for greater heights.
Minimal assemble and dismantling time coupled with advantage of early striking (Early removal of formwork with slab remaining supported on props with drop heads) makes Metriform/Quick form as today’s most cost effective system. This gives dramatic results in increasing output and saving time & labour.

Metriform Beams with dropheads can be used with props for ordinary heights or with Quiklok Scaffolding system for greater heights of slab.

Components of Metriforms system manufactured by MCE are :-

	Metriform beams of sizes 1.2 m, 1.8 m and 2.5 m.
	Drophead for 38 / 70 mm deep Metriform Beam.
	Universal panels 38 mm /70 mm deep made out of 2 mm (14.g.) sheet with pressed flanges and stiffener of sizes 1155 x 600 m, 1150x 300 mm, 900x 600mm and 900x300 mm.
	Adjuster Panels 38 mm or 70 mm deep made of 2 mm (14.g) sheet with pressed flange of sizes 1150x400 mm, 900x400 mm and 600 x 400 mm. ** Special sizes of Universal Panels are also available on request.

Metriform Beam

Metriform Beam

Infill Beam

Infill Beam

Drophead

Drophead

Different sizes of Metriform beams makes this system suitable for different sizes of grids and use of special Metriform beams can allow early striking of even beam bottom formwork.

FormWork

Working of Dropheads

Before Striking

Before Striking

After Striking

After Striking

3.4 Milestone, Sohna Road, Village Gonchi, Ballabgarh (Faridabad)- Haryana - India Mobile : 0091-9810018150 Tel : 0091-(0)129-2440965,2440966 Fax : 0091-(0)129-2440909

Floor / Slab Form		Back
	Manufactured out of 14 gauge sheets with pressed flanges and stiffner. Available in standard sizes of sizes of 1150 x 600, 900 x 600, 1150 x 300 & 900 x 300 mm. Other sizes available on request.
	Floor / Slab Form Adjusters eliminate use of cut pieces of timber, as these can fill up odd shapes of slab. Available in standard sizes of 1150 x 400, 900 x 400 and 600 x 400 mm.