Quiklok Scaffolding & Support System

Quiklok Standard (Vertical) Quiklok Ledger (Horizontal) Quiklok Omega Transoms Quiklok Omega Hop-Up Brackets Galvanized Steel Batterns Quiklok Intermediate Transoms Inside Board Transoms Bridging Horizontals Cantilever Frame Beam Brackets Fixed Forkhead Spigot Adaptor Socket Base Universal Jack Spigot Pin Longitudinal Bracing

Single node point action of unique locking make 'Quiklok' a fast, versatile and optimized system of scaffolding for scaffolding for construction, demolition and maintenance projects throughout the world.

Highlights   Quick fastening of horizontals. Four horizontals can be fastened at one time with firm clamping action of top cup making the joint rigid. Quick erection and dismantling results in time and labour saving. Versatile use in construction, demolition or maintenance projects for any type of structure i.e. straight or curved. Easy erection with no loose components. Lightweight but high loads carrying capacity up to 57 KN per vertical. Low maintenance. Safety with proven track record.

QUIKLOK STANDARD (VERTICAL)		Back
SIZES AVAILABLE 3.0M, 2.5M, 2.3M, 2.0M 1.8M, 1.5M, 1.3M, 1.0M **Special sizes on request.	Made out of 40 mm. N.B. 'M' or 'H' Tubes conforming to I.S. 1161 grade-YST 210/240 or B.S. 1775 grade 40C and 50 C with provision of cups at the rate of 500 mm or 1000 mm c/c Quiklok Standards manufactured by MCE are of the sizes as mentioned. Basic features of Quiklok Standards are: Welded Bottom Cups are pressed from high quality steel and captive mobile Top Cups made out of malleable casting provide firm grip to Ledger Blades making the connection rigid and to endure rough site handling. Access standards are provided with integral 150mm. Long spigots for making easy vertical connections.
QUIKLOK LEDGER (HORIZONTAL)		Back
SIZES AVAILABLE 2.5 M, 2.0 M, 1.8 M, 1.6 M, 1.5 M, 1.3 M, 1.25 M, 1.2 M, O.9 M, O.6 M **Special sizes on request.	Made out of 40 mm. N.B. 'L' or 'M' Tubes conforming to I.S. 1161 grade, YST 210/240 or B.S. 1775 with forged blades at the ends. Basic features of Quiklok Ledgers are: - Minimum projection of blades avoids damages in handing and uniform dimension makes the cup joint rigid.
QUIKLOK OMEGA TRANSOMS		Back
SIZES AVAILABLE 0.9 M, 1.3 M 1.8 M, 2.5 M	Omega Transoms manufactured from press bent section with flange type extensions on both sides provides a strong support for working platform with Quiklok steel battens.
QUIKLOK OMEGA HOP-UP BRACKETS		Back
	Omega Hop-up Brackets are specially designed omega sections for placing battens with provision of forged blades to be fitted with Quiklok standards by cup joint. Omega Hop-up brackets are available for single board, two board and 3 board allocations.	Single Board Bracket
GALVANIZED STEEL BATTENS		Back
SIZES AVAILABLE 2.5M X 0.238M X 0.057M 1.8M X 0.238M X 0.057M 1.3M X 0.238M X 0.057M	Galvanized steel battens are lightweight non-slip working surface, which can be used with omega transoms.
QUIKLOK INTERMEDIATE TRANSOMS		Back
SIZES AVAILABLE 0.565 mm. (2 Board) 0.795 mm  (3 Board)	For use with Hop-up brackets where distance between standards exceeds the span of scaffold boards Quiklok intermediate transoms are available for 2 boards and 3 boards.
INSIDE BOARD TRANSOMS		Back
SIZE AVAILABLE 1.62M.	Similar to intermediate transoms, inside board transom is used for providing facility for a single inside board platform.
BRIDGING HORIZONTALS		Back
SIZES AVAILABLE 5.0M 7.5M	This item is used to provide working platform complete with necessary guardrails for vehicle passage.
CANTILEVER FRAME		Back
SIZES AVAILABLE 1.0 M, 1.5 M	This item is used for providing support to decking or formwork at edges. This frame has ledger blades to be fitted into cups of Quiklok standards at one end and with provision for accepting jacks in three positions at the other end at 1.2 m,   1.25 m and 1.3 m from centerline of the standard.
BEAM BRACKETS		Back
	Beam Brackets are used to provide support to beam formwork from also support standards with provision for accepting jacks or fork heads. It has a safe load carrying capacity of 1500 kg.
FIXED FORKHEAD		Back
SIZES AVAILABLE 0.086 M X 0.2 M 0.162 M X 0.15 M	Fixed forkhead along with universal jack can be used with Quiklok standards to gives height adjustment.
SPIGOT		Back
	Made out of 300 mm long square tube and with out and bolt spigots are used for connecting verticals.
ADAPTOR		Back
	The Drophead Adaptor units provide for the easy conversion of Dropheads from the Waffle and Trough or Metriform Support Systems for use with Quiklok.
SOCKET BASE		Back
	The Socket Base is used in conjunction with the Universal jack and is drilled to allow for the insertion of a securing bolt if required. The dimensions are as mentioned.
UNIVERSAL JACK		Back
	The Screw Jack provides a method of jacking which can be used at either the top or bottom of a scaffold structure. It is used in conjunction with Forkheads, Socket Base and Drophead Adaptors.
SPIGOT PIN		Back
	A quick action locking device with no loose nuts and bolts which resists minor tensile forces between vertical members.
LONGITUDINAL BRACING		Back
SIZES AVAILABLE 2.50M X 2.00M 2.50M X 1.50M 1.80M X 2.00M 1.80M X.1.50M	For diagonal bracing of scaffolding a range of longitudinal braces made out of 20 mm N. B. 'L' tubes with swivel forged blades at either ends to be fitted into cups of Quiklok standards are available.

|| Home | About Us | Products | Feedback | Contact us ||

3.4 Milestone, Sohna Road, Village Gonchi, Ballabgarh (Faridabad)- Haryana - India Mobile : 0091-9810018150 Tel : 0091-(0)129-2440965,2440966 Fax : 0091-(0)129-2440909

email: info@mcepl.com, amaini@del3.vsnl.net.in

Copyright MCE, MAINI Construction Equipments (P) Ltd., INDIA
All rights reserved throughout the World

Website Designed & Maintained by Kaizen Corporation